Influence of urbanization on stream fish assemblages in three microbasins in the Upper Paraná River Basin / Influência da urbanização em assembleias de peixes de riachos em três microbacias na bacia do Alto Rio Paraná

The colonization pattern of fish assemblages in streams is often studied in the context of environmental filters. On the other hand, when fish assemblages are subjected to anthropogenic effects, variables associated with environmental quality assume more importance. Therefore, this work evaluated the richness and composition of fish from streams sampled at different urbanization levels, aiming to determine any direct effects on the structure of fish assemblages. To accomplish this, samples were collected from 2003 to 2011 at 31 sites distributed among 3 microbasins in the Rio Ivinhema Basin, Alto Rio Paraná. Based on environmental variables, physicochemical of the water and analysis of the use and occupation of the soil, the microbasins were classified into different urbanization levels (low, medium and high). A total of 4,320 individuals were sampled, out of which 57 fish species were recorded. Sampled sites with medium urbanization level presented higher richness compared to sampled sites with high urbanization level which presented lower richness. Species richness in these sites was explained mainly by water temperature and water velocity. Results confirmed that urbanization does directly affect environmental integrity, which, in turn, can lead to the homogenization of stream assemblages.

Estudos sobre assembleias de peixes em riachos enfatizam o papel dos filtros ambientais associados ao padrão de colonização das assembleias, por outro lado, quando a assembleia está sujeita aos efeitos antropogênicos, as variáveis ambientais associadas à qualidade ambiental assumem maior importância. Dessa forma, o objetivo deste estudo foi analisar a riqueza e a composição de peixes de riachos amostrados em diferentes níveis de urbanização, buscando evidenciar se o efeito reflete diretamente na estrutura das assembleias. As amostragens foram realizadas em 31 locais distribuídos em três microbacias na bacia Rio Ivinhema, Alto Rio Paraná, no período de 2003 a 2011. Com base nas variáveis ambientais, físico-químicos da água e análise do uso e ocupação do solo as microbacias foram classificadas em diferentes níveis de urbanização (baixo, médio e alto). Foram amostrados um total 4.320 indivíduos, dos quais foram registradas 57 espécies de peixes. Os locais amostrados com influência média da urbanização apresentaram maior riqueza de espécies, entretanto, os locais amostrados com alta influência da urbanização apresentaram menor riqueza de espécies. Dessa forma, constatamos que a urbanização influencia diretamente na integridade ambiental, que pode levar a homogeneização das assembleias de riachos.

Techno-functional properties and antioxidant capacity of the concentrate and protein fractions of Leucaena spp. seeds / Propiedades tecno-funcionales y capacidad antioxidante del concentrado y fracciones proteicas de semillas de Leucaena spp

Introduction: The use of vegetable proteins as ingredients in food systems is based on their functional properties. The water and oil holding capacity, foaming, and emulsifying capacity/stability, and antioxidant assay of the protein fractions - albumins, globulins 7S/11S, glutelins and prolamins - isolated from Leucaena seed were evaluated. Objective: The objective of this study was to evaluate the functional properties and antioxidant capacity of the concentrate and protein fractions of ripe Leucaena spp. seeds. Materials and methods: Ripe Leucaena seeds were collected and evaluated in Oaxaca, Mexico (16°59'21''N 96°43'26''O) during the months of February-April 2021.The protein concentrate was isolated by isoelectric precipitation (pH=9, pH=4). The albumins, globulins, glutelins and prolamins were isolated based on their solubility properties in different extracting solutions. Results: Glutelins constituted the main protein fraction (75.88%). Prolamins were not found. The glutelins fractions showed the highest oil holding capacity (0.93±0.08 mL g-1). The albumins fraction had the highest water holding capacity (2.53±0.15 mL g-1), foaming capacity and foam stability (71.83±1.26 % and 70.00±0.00%, respectively) and antioxidant capacity (18.09±0.88%). The globulins exhibited the highest emulsifying capacity and emulsion stability (56.83±1.76% and 55.67±1.20%, respectively). Conclusions: The concentrate and protein fraction of Leucaena seeds showed different techno-functional and antioxidant properties of interest for the food industry, like those showed by other commercial vegetable proteins(AU)

Introducción: El uso de proteínas vegetales como ingredientes en sistemas alimentarios se basa en sus propiedades funcionales. Se evaluó la capacidad de retención de agua y aceite, la capacidad/estabilidad espumante y emulsionante y el ensayo antioxidante de las fracciones proteicas -albúminas, globulinas 7S/11S, glutelinas y prolaminas- aisladas de las semillas de Leucaena. Objetivo: El objetivo de este estudio fue evaluar las propiedades funcionales y la capacidad antioxidante del concentrado y las fracciones proteicas de las semillas maduras de Leucaena spp. Materiales y métodos: Las semillas maduras de Leucaena fueron recolectadas y evaluadas en Oaxaca, México (16°59'21''N 96°43'26''O) durante los meses de febrero-abril del año 2021. Se usó harina de Leucaena desgrasada para la preparación de las fracciones proteicas. El concentrado proteico se aisló por precipitación isoeléctrica (pH=9, pH=4). Las albúminas, globulinas, glutelinas y prolaminas se aislaron en función de sus propiedades de solubilidad en diferentes soluciones de extracción. Resultados: Las glutelinas constituyeron la principal fracción proteica (75,88%). No se encontraron prolaminas. La fracción de glutelinas mostró la mayor capacidad de retención de aceite (0.93±0,08 mL g-1). La fracción de albúminas presentó la mayor capacidad de retención de agua (2,53±0,15 mL g-1), capacidad espumante y estabilidad de la espuma (71,83±1,26% y 70,00±0,00%, respectivamente) y capacidad antioxidante (18,09±0,88%). Las globulinas mostraron la mayor capacidad emulsionante y estabilidad de la emulsión (56,83±1,76 y 55,67±1,20%, respectivamente). Conclusiones: El concentrado y las fracciones proteicas de las semillas de Leucaena mostraron diferentes propiedades tecno-funcionales y antioxidantes de interés para la industria alimentaria, similares a los reportados por diversas proteínas vegetales comerciales(AU)

Preparation and in vitro release of quercetin nanocrystals self-stabilized Pickering emulsion / 中国中药杂志

A new quercetin nanocrystals self-stabilized Pickering emulsion(QT-NSSPE) was prepared by high-pressure homogenization combined with probe ultrasonic method. The influences of oil fraction, quercetin(QT) concentration, and pH of water phase on the formation of QT-NSSPE were investigated. On this basis, the QT-NSSPE prepared under optimal conditions was evaluated in terms of microstructure, stability, and in vitro release and the droplet size and drug loading were 15.82 μm and 4.87 mg·mL~(-1), respectively. The shell structure formed by quercetin nanocrystals(QT-NC) on the emulsion droplet surface was observed under a scanning electron microscope(SEM). X-ray diffraction(XRD) showed that the crystallinity of adsorbed QT-NC decreased significantly as compared with the raw QT. There were not significant changes of QT-NSSPE properties after 30 days of storage at room temperature. The in vitro release experiment confirmed that QT-NSSPE has a higher accumulative release rate than the raw QT. All these results indicated that QT-NSSPE has a great stability and a satisfactory in vitro release behavior, which is a promising new oral delivery system for QT.

Water quality assessment of the Demetrio stream: an affluent of the Gravataí River in the South of Brazil / Qualidade da água do arroio Demetrio: um afluente do rio Gravataí no sul do Brasil

The Gravataí River basin, one of the main water sources of the metropolitan region of Porto Alegre, is among the ten most polluted rivers in Brazil. Water quality is monitored only through physico-chemical and microbiological parameters in Brazil, and in this context, considering the importance of the use of biomarkers in complementing the analysis of water, the present study aimed to evaluate the environmental quality of the main affluent of the Gravataí River, Demetrio stream, through physico-chemical, microbiological, and cytogenotoxic criteria, at the stream source (P1), whereas samples P2 and P3 were obtained from the upstream near the area with the highest urban density and the downstream near the meeting point with the Gravataí River, respectively. The results for copper concentration and color classified the Demetrio stream as Class 4 in general, that is, the water is suitable only for navigation and to landscape harmony. The main genotoxic alterations (micronuclei and nuclear buds) were observed in P2, in which were obtained the highest levels of copper, in addition to iron and manganese. Anthropic interventions were observed in P1 and P2; however, due to its low metal concentration, P3, near the Gravataí River, manifested an improvement in environmental quality.

A bacia do rio Gravataí, uma das principais fontes de água da região metropolitana de Porto Alegre, está entre os dez rios mais poluídos do Brasil. No Brasil a qualidade da água é monitorada apenas através de parâmetros físico-químicos e microbiológicos e, nesse contexto, considerando a importância do uso de biomarcadores para complementar a análise da água, o presente estudo teve como objetivo avaliar a qualidade ambiental do principal afluente do Rio Gravataí, o arroio Demétrio, através de critérios físico-químicos, microbiológicos e citogenotóxicos, na nascente do arroio (P1), a montante e próximo à área com maior densidade urbana (P2) e a jusante e próximo ao ponto de encontro com o rio Gravataí (P3). Os resultados para a cor da água e para a concentração de cobre classificaram o arroio Demétrio como Classe 4 em geral, ou seja, esta água é adequada apenas para navegação e harmonia da paisagem. As principais alterações genotóxicas (micronúcleos e brotos nucleares) foram observadas no P2, no qual foram obtidos os maiores teores de cobre, além de ferro e manganês. Intervenções antrópicas foram observadas em P1 e P2; no entanto, devido à sua baixa concentração de metais, o P3, próximo ao rio Gravataí, manifestou uma melhoria na qualidade ambiental.

Validation and applicability of an alternative method for dialysis water and dialysate quality analysis / Validação e aplicabilidade de um método alternativo para análise da qualidade da água e do dialisato em diálise

ABSTRACT Introduction: In hemodialysis, patients are exposed to a large volume of water, which may lead to fatal risks if not meeting quality standards. This study aimed to validate an alternative method for monitoring microbiological quality of treated water and assess its applicability in dialysis and dialysate analysis, to allow corrective actions in real-time. Methods: Validation and applicability were analyzed by conventional and alternative methods. For validation, E. coli standard endotoxin was diluted with apyrogenic water in five concentrations. For the applicability analysis, treated water for dialysis was collected from different points in the treatment system (reverse osmosis, drainage canalization at the storage tank bottom, reuse, and loop), and dialysate was collected from four machines located in different rooms in the hemodialysis sector. Results: The validation results were in accordance with the Brazilian Pharmacopoeia acceptance criteria, except for the last two concentrations analyzed. In addition, the ruggedness criterion performed under the US Pharmacopoeia was in agreement with the results. Discussion: A limiting factor in the applicability analysis was the absence of the endotoxin maximum permitted level in dialysate by the Brazilian legislation. When comparing the analysis time, the alternative method was more time-consuming than the conventional one. This suggests that the alternative method is effective in the case of few analyses, that is, real-time analyses, favoring corrective actions promptly. On the other hand, it does not support the implementation of the alternative method in a laboratory routine due to the high demand for analyses.

RESUMO Introdução: Na hemodiálise, os pacientes são expostos a um grande volume de água, o que pode levar a riscos fatais se não cumprir com padrões de qualidade. Este estudo teve como objetivo validar um método alternativo para monitorar a qualidade microbiológica da água tratada e avaliar sua aplicabilidade em análises de diálise e dialisato, para permitir ações corretivas em tempo real. Métodos: A validação e aplicabilidade foram analisadas por métodos convencionais e alternativos. Para validação, a endotoxina padrão de E. coli foi diluída com água apirogênica em cinco concentrações. Para a análise de aplicabilidade, a água tratada para diálise foi coletada em diferentes pontos do sistema de tratamento (osmose reversa, canalização de drenagem no fundo do tanque de armazenamento, reutilização e circuito) e o dialisato foi coletado em quatro máquinas localizadas em diferentes salas do setor de hemodiálise. Resultados: Os resultados da validação obedeceram aos critérios de aceitação da Farmacopeia Brasileira, com exceção das duas últimas concentrações analisadas. Além disso, o critério de robustez realizado sob a Farmacopeia dos EUA estava de acordo com os resultados. Discussão: Um fator limitante na análise de aplicabilidade foi a ausência do nível máximo permitido de endotoxina no dialisato pela legislação brasileira. Ao comparar o tempo de análise, o método alternativo consumiu mais tempo que o convencional. Isso sugere que o método alternativo é eficaz no caso de poucas análises, ou seja, análises em tempo real, favorecendo ações corretivas imediatamente. Por outro lado, não suporta a implementação do método alternativo em uma rotina de laboratório devido à alta demanda por análises.

Super continuum generation in water doped with Homeopathic medicines

We have carried out systematic studies to investigate the effect on supercontinuumgeneration in water using 40 fs laser pulses when doped with Homeopathic medicines. We perform these studies using five series of medications with different levels of dilution (10-30 to 10-100000). We measure supercontinuum spectra that span from 400-1050nm. We monitor the area under the curve in the range 450-750 nm for each sample at a fixed incident laser energy. Our observations indicate that the yield of supercontinuum generation, in water containing Homeopathic medicine is significantly different from that obtained in water containing plain ethanol. The measurement for different dilutions shows up to 7 times standard deviation variation in the yield of supercontinuum generationEven though linear absorption in the UV-visible region does not show any significant difference for different Homeopathic medicines, the supercontinuum yield which depends on the effective nonlinear refractive index changes with different samples. (AU)

Aquaponic System with White Shrimp Litopenaeus vannamei Rearing and Production of the Plants Batis maritima, Sarcocornia neei and Sporobolus virginicus

Abstract Aquaponics is a system that integrates aquaculture with plant production in which two species are benefited, and there is water saving. In this study was carried out with an aquaponic system to verify the interaction between the growth of the halophytes Batis maritime, Sarcocornia neei, and Sporobolus virginicus associated with white shrimp Litopenaeus vannamei rearing. We also investigated if there were different responses of physicochemical variables of the water in the experimental shrimp culture ponds integrated into the growth of plants and control ponds, without plants, throughout a 56-day period. The treatment experiment and control presented a statistically significant difference in total dissolved solids, salinity, total suspended solids, ammonia, orthophosphate, and nitrite. In the experimental treatment, with the presence of plants and recirculating water, a reduction of total suspended solids, ammonia and orthophosphate was observed. The rate of shrimp production was not significantly different between treatments, and the performance was similar to that of other studies. The biomass gain of the halophyte B. maritima was 876.6 grams in 0.5 m² and of S. neei was 48.8 grams in 0.16 m². All plants of the species S. virginicus died during the experiment.

Evaluation of the physical and antifungal effects of chlorhexidine diacetate incorporated into polymethyl methacrylate

Abstract This study aimed to evaluate the physical properties and antifungal activities of polymethyl methacrylate (PMMA) acrylic resins after the incorporation of chlorhexidine diacetate salt (CDA). Methodology: First, acrylic resin specimens were fabricated with Vipi Cor® and DuraLay® resins with and without the incorporation of 0.5%, 1.0% or 2.0% CDA. The residual monomer and CDA release were measured at intervals ranging from 2 hours to 28 days using ultraviolet spectrometry combined with high-performance liquid chromatography. The antifungal activity against C. albicans was evaluated with the agar diffusion method. Fourier transform infrared spectroscopy was used to analyze the degree of resin conversion. Finally, the water sorption values of the resins were also measured. Results: The incorporated CDA concentration significantly changed the rate of CDA release (p<0.0001); however, the brand of the material appeared to have no significant influence on drug release. Subsequently, the inhibition zones were compared between the tested groups and within the same brand, and only the comparisons between the CDA 2% and CDA 1% groups and between the CDA 1% and CDA 0.5% groups failed to yield significant differences. Regarding the degrees of conversion, the differences were not significant and were lower only in the CDA 2% groups. Water sorption was significantly increased at the 1.0% and 2.0% concentrations. Conclusions: We concluded that the incorporation of CDA into PMMA-based resins enabled the inhibition of C. albicans growth rate, did not alter the degrees of conversion of the tested resins and did not change the release of residual monomers.

Effect of 10% sodium ascorbate applied for different time periods on shear bond strength of composite to bleached enamel / Efecto del 10% de ascorbato de sodio aplicado durante diferentes períodos de tiempo sobre la resistencia al cizallamiento del material compuesto al esmalte blanqueado

Aims: Residual peroxide on the enamel surface and in the interprismatic spaces decreases the shear bond strength (SBS) of composite to bleached enamel. Evidence shows that 10% sodium ascorbate can efficiently neutralize the singlet oxygen generated by the bleaching agents. This study aimed to assess the effect of duration of application of sodium ascorbate on SBS of composite to bleached enamel. Materials and Methods: This in vitro experimental study was conducted on 30 sound human third molars, which were randomly divided into three groups (n=10). In group 1, the teeth were bleached for 45 minutes and were then subjected to immediate bonding and restoration with composite resin. In groups 2 and 3, the teeth were bleached, immersed in 10% sodium ascorbate solution for 5 (group 2) and 10 (group 3) minutes and were then bonded and restored with composite, and the SBS was then measured. Results: The highest SBS (14.02±8.6MPa) was noted in group 3 (immersion in 10% sodium ascorbate for 10 minutes before bonding). The lowest SBS was noted in group 1 (immediate bonding after bleaching) (p<0.05). The difference in SBS of groups 1 and 2 was not significant (p=0.4). Conclusion: Application of 10% sodium ascorbate for 10 minutes increases the SBS of composite to bleached enamel.

Objetivos: el peróxido residual en la superficie del esmalte dental y en los espacios interprismáticos disminuye la resistencia al cizallamiento (R AC) de la resina compuesta al esmalte dental blanqueado. La evidencia muestra que el 10% de ascorbato de sodio puede neutralizar eficientemente el oxígeno singlete generado por los agentes blanqueadores. Este estudio tuvo como objetivo evaluar el efecto de la duración de la aplicación de ascorbato de sodio en la R AC de la resina compuesta al esmalte dental blanqueado. Materiales y Metodos: Este estudio experimental in vitro se realizó en 30 terceros molares humanos sanos, que se dividieron aleatoriamente en tres grupos (n=10). En el grupo 1, los dientes se blanquearon durante 45 minutos y luego se sometieron a una unión y restauración inmediata con resina compuesta. En los grupos 2 y 3, los dientes se blanquearon, se sumergieron en una solución de ascorbato de sodio al 10% durante 5 (grupo 2) y 10 (grupo 3) minutos y luego se unieron y restauraron con resina compuesta; luego se midió la R AC. Resultados: La R AC más alta (14,02 ± 8,6 MPa) se observó en el grupo 3 (inmersión en ascorbato de sodio al 10% durante 10 minutos antes de la unión). El valor de R AC más bajo se observó en el grupo 1 (unión inmediata después del blanqueo) (p<0,05). La diferencia en R AC de los grupos 1 y 2 no fue significativa (p=0,40). Conclusión: la aplicación de ascorbato de sodio al 10% durante 10 minutos aumenta la R AC de la resina compuesta al esmalte dental blanqueado.

Color stability and surface roughness of chitosan- and nanodiamond-modified bisacrylic resin

Abstract: The aim of this study is to evaluate the effect of chitosan or nanodiamond incorporation on the color stability and surface roughness of a bisacrylic resin subjected to artificial aging. Four bisacrylic resins were evaluated, namely, control, chitosan-modified material, nanodiamond-modified material, and chitosan-nanodiamond-modified material. Twenty-four specimens were prepared for each material. The surface roughness was determined using a profilometer with a cut-off of 0.25 mm. The baseline color was measured according to the CIE L*a*b* system using a reflectance spectrophotometer. After these tests, the specimens were individually immersed in cola soft drink, red wine, or distilled water (n = 8) for 28 days. After the aging, the surface roughness and final color were re-evaluated. The color stability was determined using the difference between the coordinates obtained before and after the aging process. The data on roughness and color change were evaluated using ANOVA and the Tukey test (α = 0.05). The results show that the incorporation of nanodiamonds and chitosan into a bisacrylic resin provided a better color stability to the materials (p = 0.007). The storage in red wine resulted in a higher variation in the surface roughness values, especially when only the nanodiamond was incorporated to the material (p < 0.05). The incorporation of both chitosan and nanodiamonds are promising in providing an improvement in the properties of the bisacrylic resin when they are simultaneously incorporated in the product.

Fluoride release and uptake in enhanced bioactivity glass ionomer cement ("glass carbomer™") compared with conventional and resin-modified glass ionomer cements

Abstract Objectives To study the fluoride uptake and release properties of glass carbomer dental cements and compare them with those of conventional and resin-modified glass ionomers. Materials and Methods Three materials were used, as follows: glass carbomer (Glass Fill), conventional glass ionomer (Chemfil Rock) and resin-modified glass ionomer (Fuji II LC). For all materials, specimens (sets of six) were matured at room temperature for time intervals of 10 minutes, 1 hour and 6 weeks, then exposed to either deionized water or sodium fluoride solution (1000 ppm in fluoride) for 24 hours. Following this, all specimens were placed in deionized water for additional 24 hours and fluoride release was measured. Results Storage in water led to increase in mass in all cases due to water uptake, with uptake varying with maturing time and material type. Storage in aqueous NaF led to variable results. Glass carbomer showed mass losses at all maturing times, whereas the conventional glass ionomer gained mass for some maturing times, and the resin-modified glass ionomer gained mass for all maturing times. All materials released fluoride into deionized water, with glass carbomer showing the highest release. For both types of glass ionomer, uptake of fluoride led to enhanced fluoride release into deionized water. In contrast, uptake by glass carbomer did not lead to increased fluoride release, although it was substantially higher than the uptake by both types of glass ionomer. Conclusions Glass carbomer resembles glass ionomer cements in its fluoride uptake behavior but differs when considering that its fluoride uptake does not lead to increased fluoride release.

Water pH and hardness alter ATPases and oxidative stress in the gills and kidney of pacu ( Piaractus mesopotamicus )

This study aimed to assess the effects of low and high water hardness in interaction with different water pH in pacu (Piaractus mesopotamicus). Pacu juveniles were subjected to low (50 mg CaCO3 L-1 - LWH) or high water hardness (120 mg CaCO3 L-1 - HWH) at water pH of 5.5 (acidic), 7.5 (circumneutral) or 9.0 (alkaline) for 15 days. Gills and kidneys were collected (days 1, 5 and 15). Gill Na+/K+-ATPase (NKA) and vacuolar-type H+-ATPase (V-ATPase) activities were higher in alkaline pH with HWH on day 1. Gill and kidney NKA and V-ATPase activities were higher in acidic pH with LWH on day 15. Gill NKA activity of pacus under alkaline pH with LWH was higher than those exposed to HWH. Reduced antioxidant capacity in the gills and kidney and enhanced thiobarbituric acid reactive substances (TBARS) levels were demonstrated in fish exposed to acidic or alkaline pH, mainly with LWH. HWH increased glutathione-S-transferase (GST) activity and reduced TBARS levels in the gills and kidney. On day 15, GST activity was increased at acidic pH with LWH. In conclusion, circumneutral pH presents less oxidative stress and fewer variations in ATPases and HWH reduced deleterious effects in fish exposed to acidic or alkaline pH.(AU)

Este estudo objetivou analisar o efeito de baixa e alta dureza da água em interação com diferentes pH da água em pacu (Piaractus mesopotamicus). Juvenis de pacu foram submetidos a baixa (50 mg CaCO3 L-1 - BDA) ou alta dureza da água (120 mg CaCO3 L-1 - ADA) em pH da água de 5.5 ácido), 7.5 (circum-neutro) ou 9.0 (alcalino) por 15 dias. Foram coletados brânquias e rim (dias 1, 5 e 15). Atividade de Na+/K+-ATPase (NKA) e H+-ATPase do tipo vacuolar (V-ATPase) branquial foram maiores em pH alcalino com ADA no dia 1. Atividade de NKA e V-ATPase branquial e renal foram maiores em pH ácido com BDA no dia 15. Atividade de NKA branquial de pacus submetidos a pH alcalino com BDA foi maior que aqueles expostos para ADA. Em peixes expostos a pH ácido ou alcalino com BDA houve redução da capacidade antioxidante nas brânquias e rim e aumento dos níveis de "substâncias reativas ao ácido tiobarbitúrico" (TBARS). Em ADA aumentou a atividade da "glutationa-S-transferase" (GST) e reduziu níveis de TBARS nas brânquias e rim. No dia 15, a atividade da GST foi maior em pH ácido com BDA. Em conclusão, pH circum-neutro apresentou menor estresse oxidativo e poucas variações na atividade de ATPases e ADA reduziu efeitos deletérios em peixes expostos a pH ácido ou alcalino.(AU)

Doxycycline release and antibacterial activity from PMMA/PEO electrospun fiber mats

Abstract Objective: To investigate the use of polymethyl methacrylate (PMMA) electrospun fiber mats containing different amounts of polyethylene oxide (PEO) as a doxycycline delivery system and to test antibacterial activity against an oral pathogen. Methodology: PMMA powders or PEO (mol wt 200 Kd) (10,20,30% w/w/) were dissolved in N, N-dimethylformamide (DMF) to obtain a final polymer concentration of 15% in DMF (w/v). 2% Doxycycline monohydrate was added to the solutions and submitted to vortex mixing. The solution was transferred to a plastic syringe and fit into a nanofiber electrospinning unit. The parameters applied were: voltage at 17.2 kV; distance of 20 cm between the needle tip and the collector plate; target speed at 2 m/min; and transverse speed at 1cm/min. Syringe pump speed was 0.15 mm/min. The drug release analysis was performed by removing aliquots of the drug-containing solution (in PBS) at specific periods. Doxycycline release was quantified using RP-HPLC. Fiber mats from all groups had their antibacterial action tested against S. mutans based on inhibition halos formed around the specimens. The experiments were performed in triplicate. Gravimetric analysis at specific periods was performed to determine any polymer loss. Morphological characterization of the electrospun fibers was completed under an optical microscope followed by SEM analysis. Results: The addition of PEO to the PMMA fibers did not affect the appearance and diameter of fibers. However, increasing the %PEO caused higher doxycycline release in the first 24 h. Fibers containing 30% PEO showed statistically significant higher release when compared with the other groups. Doxycycline released from the fibers containing 20% or 30% of PEO showed effective against S. mutans. Conclusion: The incorporation of PEO at 20% and 30% into PMMA fiber mat resulted in effective drug release systems, with detected antibacterial activity against S. mutans.

Surface and vertical dimensional changes of mineral trioxide aggregate and biodentine in different environmental conditions

Abstract Surface changes in biological environments are critical for the evaluation of physical and biological activity of biomaterials. Objective: This study investigated surface alterations of calcium silicate-based cements after exposure to different environments. Material and Methods: Forty-eight cylindrical cavities were prepared on root surfaces. The cavities were filled using ProRoot MTA or Biodentine and assigned to four subgroups (n=6): dry, wet, acidic, and blood. Surface topographies were evaluated using an optical profilometer for 28 days, and the roughness of the material surfaces was quantified. Vertical dimensional change was measured by determining the height difference between the material surface and the flat tooth surface. Data were compared with a two-way repeated measures ANOVA and Bonferroni tests. Results: In dry condition, the surface roughness of MTA or Biodentine was constant up to 3 days (p>0.05) but decreased after 28 days (p<0.05). In dry condition, ProRoot MTA presented constant surface level through time, while Biodentine showed decreased surface level after 28 days. In wet condition, the roughness and the surface levels of both materials increased after 1 day (p<0.05). Neither the surface roughness nor the levels of the materials showed significant changes in acidic conditions (p>0.05). Both materials showed the highest roughness in blood conditions on the 1st day (p<0.05), while the surface roughness in blood decreased dramatically after 28 days. The roughness of Biodentine was higher in wet conditions up to 3 days compared with ProRoot MTA (p<0.05). Likewise, in blood condition, Biodentine showed higher roughness on the 28th day than ProRoot MTA (p<0.05). Conclusions: Dry, wet, and blood conditions had a time-dependent effect on the surface roughness and vertical dimensional changes of the materials. However, acidic conditions did not affect the roughness and the surface level of the materials.

Surface morphology and mechanical properties of conventional and self-adhesive resin cements after aqueous aging

Abstract The stable long-term performance of resin cement under oral environmental conditions is a crucial factor to obtain a satisfactory success of the allceramic dental restoration. Objective: This study aimed at evaluating and comparing the surface morphology and mechanical property of conventional and self-adhesive resin cement after aqueous aging. Materials and Methods: Disc-shaped specimens of 3 conventional (C1: Multilink N, C2: Duolink, C3: Nexus 3) and 3 self-adhesive (S1: Multilink Speed, S2: Biscem, S3: Maxcem) types of resin cements were subjected to irradiation. After 24 h, the Knoop microhardness of each resin cement was evaluated. The specimens were immersed separately in distilled water and maintained at 37°C. A total of 5 specimens of each resin cement were collected at the following time intervals of immersion: 1, 6, 12 and 18 months. The samples were used to evaluate the Knoop parameters of microhardness, sorption and solubility. The surface morphology of the specimens after 18 months of immersion was observed by scanning electron microscopy. The sorption and solubility data were analyzed by two-way ANOVA. The Knoop microhardness was tested by the ANOVA repeated measures (P<0.05). Results: The sorption and solubility parameters of C1 and S1 exhibited significant fluctuations during the aqueous aging. The hardness of the S1 and S2 specimens decreased significantly after an 18-month water immersion. The S1, S2 and S3 specimens indicated higher filler exposure and stripping and apparent pores and cracks compared to specimens C1, C2 and C3, respectively. Conclusion: The surface of selfadhesive resin cements is more susceptible to aqueous damage than that of the conventional resin cements.

Effect of diode laser irradiation on the bond strength of polymerized non-simplified adhesive systems after 12 months of water storage

Abstract Objectives: The aim of this in vitro study was to evaluate the bonding strength of non-simplified dentin bonding systems (DBS) to dentin irradiated with a diode laser (970 nm) immediately and after 12 months of water storage following either primer or bond application. Material and methods: The experimental design included three different factors: DBS type [AdperTM Scotchbond Multipurpose (MP) and Clearfil™ SE Bond (CSE)], irradiation [without irradiation - control (C), irradiation after primer application (AP), and irradiation after bond application (AB)], and time [initial (I) and after 12 months of water storage (12 m)]. Sixty sound human third molars (n = 10) were obtained, and their flat occlusal dentin areas were prepared and standardized. Laser irradiation was performed in the contact mode perpendicular to the dental surface over an automatically selected scanning area at a pulse energy of 0.8 W, frequency of 10 Hz, and energy density of 66.67 J/cm2. After 7 days of treatment, the specimens were cut, and half of them were subjected to microtensile testing (500 N/0.05 mm/min), whereas the remaining sticks were examined after 12 months of water storage. The obtained data were analyzed by three-way analysis of variance (ANOVA) followed by a Tukey test (p<0.05). The observed fracture modes were investigated using a portable digital microscope with a magnification of 40x. Results: Among the utilized DBS, MP generally exhibited higher bond strengths, but did not always differ from CSE under similar conditions. The irradiation factor was statistically significant only for the MP/AB groups. After 12 months of storage, all groups demonstrated a significant reduction in the bond strength, whereas the results of fracture analysis showed a predominance of the adhesive type. Conclusions: The laser treatment of non-simplified DBS was not able to stabilize their bonding characteristics after 12 months.

Effect of radiant exposure and UV accelerated aging on physico-chemical and mechanical properties of composite resins

Abstract Currently, there is no consensus in terms of defining the minimum radiant exposure values necessary for achieving adequate properties of composite resin. In addition, the long-term influence that radiant exposure has on the properties of composite resins is still questionable. Objective: The objective of this study was to evaluate the effect of radiant exposure and UV accelerated aging on the physico-chemical and mechanical properties of micro-hybrid and nanofilled composite resins. Material and Methods: A nanofilled (Filtek Supreme; 3M ESPE) and a micro-hybrid composite resin (Filtek Z250; 3M ESPE) were investigated under different radiant exposures (3.75, 9, and 24 J/cm2) and UV accelerated aging protocols (0, 500, 1000, and 1500 aging hours). The degree of conversion (DC), flexural strength (FS), modulus (M), water sorption (WS), and solubility (WL) were evaluated. The results obtained were analyzed using two-way ANOVA and Tukey's test. Comparisons were performed using a significance level of α=0.05. Results: The DC, FS, and M were found to be significantly influenced by both radiant exposure and accelerated aging time. The DC and EM increased with radiant exposure in the no-aging group (0-hour aging) for both micro-hybrid and nanofilled composites, whereas no correlation was found after accelerated aging protocols. WS and WL of micro-hybrid and nanofilled composite resins were scarcely affected by radiant exposure (p>0.05), whereas they were significantly reduced by accelerated aging (p<0.001). Conclusions: Although increasing radiant exposure affected the degree of conversion and mechanical properties of micro-hybrid and nanofilled composites, no influence on the hydrolytic degradation of the material was observed. In contrast, UV accelerated aging affected both the physico-chemical and mechanical properties of the composites.

Mechanical-physicochemical properties and biocompatibility of catechin-incorporated adhesive resins

Abstract Several anti-proteolytic dentin therapies are being exhaustively studied in an attempt to reduce dentin bond degradation and improve clinical performance and longevity of adhesive restorations. Objectives This study assessed the effect of epigallocatechin-3-gallate (EGCG) on long-term bond strength when incorporated into adhesives. Material and Methods Adhesive systems were formulated with EGCG concentrations of 0 wt%: (no EGCG; control); 0.5 wt% EGCG; 1.0 wt% EGCG, and 1.5 wt% EGCG. Flexural strength (FS), modulus of elasticity (ME), modulus of resilience (MR), compressive strength (CS), degree of conversion (DC), polymerization shrinkage (PS), percentage of water sorption (%WS), percentage of water solubility (%WL) and cytotoxicity properties were tested. Dentin microtensile bond strength (µTBS) was evaluated after 24 h and again after 6 months of water storage. The adhesive interface was analyzed using scanning electron microscopy (SEM). Results No significant differences were found among the groups in terms of FS, ME, MR, CS and PS. EGCG-doped adhesives increased the DC relative to the control group. EGCG concentrations of 1.0 wt% and 0.5 wt% decreased the WS of adhesives. WL decreased in all cases in which EGCG was added to adhesives, regardless of the concentration. EGCG concentrations of 1.0 wt% and 0.5 wt% reduced cytotoxicity. EGCG concentrations of 1.0 wt% and 0.5 wt% preserved µTBS after 6 months of storage, while 1.5 wt% EGCG significantly decreased µTBS. SEM: the integrity of the hybrid layer was maintained in the 0.5 wt% and 1.0 wt% EGCG groups. Conclusion EGCG concentrations of 1.0 wt% and 0.5 wt% showed better biological and mechanical performance, preserved bond strength and adhesive interface, and reduced cytotoxicity.

Analysis of the association between bladder carcinoma and arsenic concentration in soil and water in southeast Brazil

ABSTRACT In approximately 50% of cases of bladder carcinoma, an associated predisposing factor can be established. The main factors are exposure to tobacco, arsenic (As) ore and aromatic compounds. Arsenic is a metalloid with a low average concentration in the earth's crust, and one of the most dangerous substances for human health. The present study aims to evaluate the incidence of hospitalization and mortality from bladder neoplasia and its possible association with As concentration in water and soil in two of the most critical regions of Brazil: the states of São Paulo and Minas Gerais. We have investigated bladder cancer hospitalization and mortality in the states of Sao Paulo and Minas Gerais during 2010-2014. Water and soil samples were analyzed and As concentrations were established. Data were obtained through the Department of Informatics of the Brazilian Unified Health System. Correlation was made with water samples from São Paulo and with data on soil analysis from Minas Gerais. The results revealed no direct association in the distinctive municipalities. Areas with high environmental As concentration had a low bladder cancer rate, while areas with normal as levels had similar cancer rates. The quantitative variables did not present a normal distribution (p < 0.05). In conclusion, we did not observe a correlation between as concentration in water or soil and bladder cancer's hospitalization and mortality rates in the states of São Paulo and Minas Gerais.